Advert Description

MICHIGAN SEAT CO.

JACKSON, MICHIGAN.

175440.

SEAT PAN/BASE.

ALL STEEL.

47X43CM APPROX.

FACTORY WELDED MOUNTING PLATE WITH 6 HOLES WHICH COULD BE TO LET ANY WATER OUT AND ALLOW AIR TO DRY THE FOAM. IT ALSO HAS 1 THREADED HOLE.

REMOVED FROM A WORKING MID 1980'S MOUNTFIELD/MURRAY 25/7 3-SPEED RIDE ON MOWER WHICH IS BEING LIGHTLY RESTORED AND MODIFIED.

THE EDGING TRIM WAS IN AVERAGE TO GOOD CONDITION FOR AGE BUT HAS BEEN REMOVED.

THE PLASTIC/PVC WAS IN BAD CONDITION AND HAS BEEN REMOVED.

THE FOAM WAS IN BAD TO AVERAGE CONDITION AND HAS BEEN REMOVED.

THE STEEL PAN/BASE HAD VERY LIGHT TO MEDIUM SURFACE RUST COVERING APPROXIMATELY 65%. A NEW WIRE BRUSH WHEEL AND A NEW HIGH SPEED 240V DRILL WERE USED TO REMOVE AS MUCH OF IT AS POSSIBLE. IT LOOKED AND FELT SOLID AND GOOD ENOUGH TO THEN GENEROUSLY COAT IT WITH DINITROL RUST CONVERTER.

I HAS BEEN SPRAYED WITH HQ PRIMER.

IT WILL BE SPRAYED IN BLACK AND THEN IN LACQUER SOON.

THE LABEL/STICKER HAS BEEN COVERED AND WILL BE VISIBLE AND PROTECTED UNDER THE LACQUER.

I WILL ADD MORE PICTURES WHEN COMPLETED.

THANKS.

Additional Information

This advert has no additional information available. Why not get in touch with M.A.S. DESIGNS to request more…

Try our delivery partners AnyVan