Advert Description

This tanks can be supplied with a wide range of custom fuel dispensing equipment to suit virtually every situation. Fully compliant with PPG2 guidelines, the range of bulk fuel storage tanks have been designed and built with safety, security, access and maintenance needs in mind. They are also suitable for use with both Avgas and Jet A-1.

-Horizontal double skinned integrally bunded construction.
-Heavy duty 304L grade stainless steel inner tank with manway access.
-Inspection hatch.
-5mm & 6mm thick S275 grade mild steel outer bund. 110% tank capacity.
-Double broad cradle base with 1:40 angled fall to sump low point.
-Lifting eyes suitable for lifting and moving empty tank.
-Open fronted design for easy access to fuel dispenser, with rain peak and galvanised pump stand.
-Premium extra cabinet with vented side entrance door giving access to filters, reel and offset fill line etc.
-Side cabinet with roller shutter door.
-Fill point – 2” stainless steel with Self Climat OPD Overfill Valve DN50 type NT- Jet A1 / Avgas.
-Normond analogue hydrostatic tank contents gauge.
-1” stainless steel sump draw line.
-Shot blasted to SA 2.5 and painted in 2-pack polyurethane finish (standard White).
-Suitable for use with Avgas or Jet A-1.

Specification:
-Pumptronics Series C Commercial fuel dispensing unit with stainless steel body and digital readouts.
-80 to 90 litre/min flow rate*, ATEX Exd IIB T4 230V 50Hz motor. Approved by UK Weights and Measures.
-Measuring Instrument Directive approved.
-Stainless steel pump internals with full air separation.
-Dual Facet VF-22SB filter vessel tested to EI/API 1581 (5th edition). -Differential pressure gauge & water drain.
-FG-0-612-2 monitor filter cartridge to EI/API 1583 (4th edition) (particle & water blocking, 0.5 micron).
-Facet CC-22-7 Coalescer Cartridge to API 1581 5th edition.
-Hydraulic powered hose reel with 30m x 1” Elaflex HD25 hose to EN 1361, API 1529 C.
-ZVF25 manual refuelling nozzle with removable fine mesh strainer, complete with earth lead and dust cap.
-30m hand rewind earth bonding reel.
-Fuel sampling, inspection and recovery system, with 4L Closed Circuit Sampler.
-EX50 230V sump pump & return pump (fitted with return Facet VF-22SB filter vessel, complete with coalescer filter element).

Optional Extras:
-Floating suction arm (recommended best practice) (50mm NB Sch 5 304L stainless tube).
-Self-loading pump, centrifugal stainless steel, 2.2kW 230V Exd IIB T3 motor.
-Input filtration, EI 1590 Qualified 2 micron particle element, in stainless steel vessel.
-Galvanised anti-slip staircase and manway access platform. Hand rail for easy & safe access, BS compliant. (incl. UK installation. Increases overall height by 1m approx. Customer to confirm compliance with site height restrictions).
-ATEX Zone 1 HDL 100 - Ex emb Fluorescent Luminaire IP66/67 T4/T5 Gas & Dust.
-External area flood lights and mounting poles, with dawn to dusk light controller.
-Dry break coupling on fill point (Jet A-1 type).
-Nozzle earth lead.
-Nozzle dust cap (Please note that the fitting of this cap can interfere with the stowing of the nozzle in the holder).

Additional Information

This advert has no additional information available. Why not get in touch with ipsinc to request more…

Try our delivery partners AnyVan