Prices Include VAT Welcome to our multiple listing page for our Log grabs and optional hydraulic rotators and swing attachment packages. Choose what you require from the drop down options box above. If you are unsure or don't see what you need please call 0203 305 6509 for advice. If you are going to use the grab on an excavator then you will need have it supplied with a swing attachment to mount the rotator to your dipper arm. we will require the following from you excavator (measure off a bucket) pin diameter and width between the bucket brackets. The grabs are made from Q690 grade high tensile steel (the stuff crane jibs are made from) and all pin points on the grabs are bronze bushed with greasers. The grab can be supplied with a hydraulic rotator and a swing attachment and four pipes to connect to your auxiliary pipes on the boom (as shown in picture). You will need 1 double acting auxiliary service for the rotator and T off your bucket ram to operate the grapple. If you do not have an auxiliary double acting service please call as we can advise and supply parts if necessary. Free delivery to most parts of UK, please call to obtain a delivery cost if you are in the highlands, or islands or other outlying areas 0203 305 6509 The grabs are in stock but the swing attachments are made to order so please allow 7 - 10 days Credit and debit cards accepted These grabs and rotators are high end quality built to european spec made from very high grade Q690 high tensile steel and supplied to OEM's hence the higher price over lesser quality grabs.