Ah-1000 trace elliot stack built in uk

Details

Description

Specifications
Preshape circuit.
Valve drive circuit.
12-band classic graphic equalizer.
Dual-band Compressor with separate controls for each Hi and Lo bands.
Effects Loop with hi-pass/lo-pass/full range outputs, Left/Right/Mono returns, Series/Parallel switch and Level control.
Output Mute switch, active on all outputs except Tuner Out.
Electronically balanced XLR DI outputs for Pre Eq and Post Preamp Left & Right.
Left and Right Line outputs.
MOSFET technology 2 x 500 Watts (4 Ohms) output stages.
Footswitch allowing control of Preshape, Valve drive, Graphic EQ, Compressor, Effects Loop and Output Mute.
Original classy black ‘pimple’ covering.
Metal handles and protective corners.
Dimensions (HxWxD): 6.2'' (157mm) x 19.3'' (491mm) x 17.1'' (435mm)
Weight: 48.4lbs (22kg)

as for condition, although i have only gigged with it a couple of times it is a tiny bit worn, according to the retailer it was the last 1000 left in the country - what with them moving production over to america, and was being taken around with the peavey roadshow, i had to wait ages to get my hands on it !

But anyways there is wear on the handle which is most noticeble and general marks here and there, but it is pretty much perfect, it plays and sounds absolutley fine, no problems at all.

I have trace 1028h and trace 1518, both were bought with the amp and unlike the amp are in absolutely perfect condition ( i look after my equipment )

Specifications 1028h

400 Watts RMS, 8 Ohms.
Two 10” (254mm) special design Celestion speakers.
High frequency horn with variable attenuation.
Two Neutrik® Speakon® and two 1/4" (6.35mm) jack connectors.
Cabinet tuned, with bottom unobstructed slot, to 40Hz.
Lightweight poplar plywood construction.
Original classy black ‘pimple’ covered.
Metal handles and protective corners.
Dimensions (HxWxD): 20'' (508mm) x 24.2'' (615mm) x 17.1'' (435mm)
Weight: 56.3lbs (25.6kg)

Specifications 1518

500 Watts RMS, 8 Ohms.
15” (382mm) special design Celestion speaker.
Two Neutrik® Speakon® and two 1/4" (6.35mm) jack connectors.
Cabinet tuned, with bottom unobstructed slot, to 38Hz.
Lightweight poplar plywood construction.
Original classy black ‘pimple’ covered.
Metal handles and protective corners.
Dimensions (HxWxD): 26.9'' (682mm) x 24.2'' (615mm) x 17.1'' (435mm)
Weight: 57.4lbs (26.1kg)

Any sensible offers will be considered