The ensign socket has the Simpson Lawrence logo on it, as seen in the photo. It was encrusted in white paint, so the patina on the bronze casting could not be preserved, so I have polished it up with a steel wool pad. It has a clearance hole for a 1 inch staff.
I am asking £20 for it.
There are five 1 inch diameter bronze bolts made from an old bronze shaft which were used to hold on half torpedo shaped lead castings on my boat until I removed them and recast the lead so it could go inside the GRP fin.
The lengths are 21 1/2, 20 7/8, 19, 17 3/4 & 16 ins (545, 530, 483, 450, 407 mm). They have 1 inch Whitworth threads at each end with 1/4 ins thick washers, 3/4 ins thick nuts on 2 ins thread length.
I am asking £25 for each bolt, or £100 for all five.
Buyer collects or they could be sent by post or parcel2go carrier at cost.