Used Industrial Tools and Machinery, Buy Sell and Advertise in the UK and Ireland

This advert is located in and around Samlesbury, Lancashire

Colchester 3 phase lathe for sale, I think the model is Master. We were advised when we got this machine it was in working order but it had been in storage for years and not used. We have not been able...

This advert is located in and around Warrington, Cheshire

Here I have two proper joiners work benches the smaller one of the two is 4 ft 6ins long 31 ins deep and height is 33 ins, it has a built in joiners vice, and cupboards all around = at each end and...

This advert is located in and around Burton On Trent, Staffs

2007 500kg TCP Hi-Tip Skip Loading Dumper/Barrow. Kubota diesel engine. 1100 hours from new Tips fully over unlike most other tracked dumpers. Serviced & checked November 2018 Good working order and...

This advert is located in and around Richmond, North Yorkshire

Bomag 80 double drum roller rops, clean and tidy

This advert is located in and around Abergavenny, Monmouthshire

BARNES PLANT Terex Benford PT3000 3TON DUMPER 3000 kg Pay loadYear 2004Low hoursJust 600 hours displayedNice clean conditionNot Knocked aboutGood tyresFully serviced ready for workWE DELIVER£4750.00Plus...

This advert is located in and around Colchester, Essex

Kubota RIGHTHAND - REAR - SLIDER Glass for Kx61-3 Brand new in original packing never opened. Grab a bargain stock room clearance! Any questions please ask or call 01206 844400

This advert is located in and around Pershore, Worcestershire

Jaw 90% Good , Rubber Tracks 80% 10tons per Hour

This advert is located in and around Lincoln, Lincolnshire

2011 Doosan DX60R

This advert is located in and around Colchester, Essex

2011 Thwaites 1 ton high tip with fold down ROPS, good clean order. Serviced and ready for work. Hours: 1452 Operating Weight: 1295 kg Payload: 1000 kg Tyres (%): 60 £7000.00 Plus Vat Ex hire fleet...

This advert is located in and around Lutterworth, Leicstershire

plug in n go very good working order

This advert is located in and around Morecambe, Lancashire

i have 2 of these electric cranes which i used for lifting boats off their trailers so that work could be done on the hull or trailer. both cranes are in fantastic working order and are still in situ...

This advert is located in and around Bridgnorth, Shropshire

Snap-on single phase air compressor. 200 L tank, 3 hp Motor 150 PSI. Air compressor has had very little use. excellent condition no Air or Oil leaks. Only 7 years old. please don't hesitate to contact...

This advert is located in and around Holmfirth, West Yorks

as new as never been used also sat on a trolly to move it * Power output 2.0kW (T2801 2.4kW) * Recoil start * 15 litre fuel tank * Full frame * Weight 44kg (T2801 45kg) * Sound level 90dB at 4m Brushless,...

This advert is located in and around Bolton, Lancashire

180amp tig pulse welder dual voltage 110v - 240v as new never used Comes with Earth lead Tig torch Argon regulator

This advert is located in and around Bolton, Lancashire

180amp tig pulse welder dual voltage 110v - 240v as new never used Comes with Earth lead Tig torch Argon regulator

This advert is located in and around Watergrasshill, Co. Cork, IRELAND

Good undercarriage, Good Condition.

This advert is located in and around Watergrasshill, Co. Cork, IRELAND

Piped, Good Condition.

This advert is located in and around South Witham, Linconshire

Doosan 7-73/10-53 dual pressure compressor powered by a Cummins QSF2.8 engine. On low pressure setting 250 cfm @ 7 bar and on high pressure setting 187 cfm @ 10.3 bar with a max 12 bar working pressure.

This advert is located in and around Banbridge, County Down

2014 536-60 Agri Super, 3600hrs, new Mitchelin 460/70r24 tyres, 125hp engine, 40kph 6 speed torque lock transmission, boom suspension, air con, air seat, choice of headstock, mint machine, call for...

This advert is located in and around Portsmouth, Hampshire

Very Tidy HitachiZX280LC Paintwork on all working areas original. All equipment worked & speed ok. Mc tracked straight line and sprigged ok No visible Oil Leaks. Hydraulic Q/h + Hammer & rotation circuit....