"lathes wanted" - Second Hand Model Making and Engineering, Buy and Sell with zero fees in the UK and Ireland

This advert is located in and around Hambledon, Hampshire

3 Jaw Chuck with remove able backplate - 1 1/2 Inch Acme 8 TPI

3 days ago

This advert is located in and around Harlington, Bedfordshire

Vintage Wade lathe with chucks, back-gearing etc. mounted on simple cabinet with electric motor drive. Some water damage to handwheels and tool post spigot thread needs attention or spigot replacing....

43 days ago

This advert is located in and around Hambledon, Hampshire

Large 3 Jaw Lathe Chuck, 6 inch dia. Back plate is 165mm dia with a 38mm deep vee thread No chuck key Proper English chuck with only surface rust - not Chinese rubbish, was on my fathers Boxford. Weighs...

3 days ago

This advert is located in and around Darlington, Co. Durham

Includes all lathe accessories, also many other items, micrometers, bench tools, etc. Has been well looked after.

24 days ago

This advert is located in and around Clitheroe, Lancashire

Harrison L5 Centre lathes, one rebuilt and working; the other part assembled and we believe all parts are present to enable it to be brought back to working order. Buyer would need to satisfy themselves...

1 day ago

This advert is located in and around North Walsham, Norfolk

A record power wood turning lathe CL3 manual speed change with a selection of tools including a Oneway chuck to various jaws, reasonable condition with light usage since I bought it new, also a manual...

84 days ago

This advert is located in and around Southport, Merseyside

Used once for about 30 minutes for a specific project only, no wear or machining marks, only oil staining from storage, table approx' 165mm x 100mm with 4 tee slots, travel 100mm and leadscrew pitch...

13 days ago