Advert Description
MERCEDES-BENZ 280SE 280SE/C 280SL W113 W108,W109 W111 Pagode HEAD GASKET SET 1968-72
Original German manufactured
by "Reinz-Payen" and is Very Well Constructed Item from back in the 1960's-Dry Stored ever since.
I'd rather restore or USE the Real Deal-Original Than a less expensive Chinese Knock-Off part any-day!
There are some marks on some components which I`ve shown in pics from storage but nothing that will impede the operation of them.
Please Consult your Vehicles manual and check the pics so that you are getting the correct parts, don`t just assume that if your Vehicle is on the list it will fit, otherwise it could be costly.
Note: This is the early series 1 Head Gasket (Classed as Square)
280SE/C Coupé W111.024 2.8 2778cc 160PS 118kW M130.980,984 [01.1967-12.71]
280SE/C Cabriolet W111,025 2.8 2778cc 160PS 118kW M130.980,984 [01.1967-05.71]
280SL Pagoda W113,044 2.8 2780cc 170PS 125kW M130.983 [01.1968-03.71]
280SE S-Class W108.018 2.8 2778cc 160PS 118kW M130.980 [01.1968-08.72]
280SEL S-Class W108.019 2.8 2778cc 160PS 118kW M130.980 [01.1968-04.72]
300 SEL S-Class W109.016 2.8 2748cc 170PS 125Kw M130.981 [01.1968-08.70]
280SE/C/SL Div. 2.8 2778cc 140PS 103kW M130.984 [1968-72]
Overall Gasket Dimensions:-
Ø:...............87.5mm
Length:..........638mm
Width:...........140mm
Thickness:.......2mm (Unpressed)
Chain Gallery:-
Inside Width:....32mm
Inside Length:...205mm
Outside Width:...52mm
Outside Length:..244mm
These measurements should be considered approximate as they were made using a cheap plaggy caliper and tape measure not to mention poor eye sight!
£75
Collection or arranged postage at cost using BACS payment First
